Kamstrup

MULTICAL® 403

Pressure loss over the component is dimensioned to be max 10 kPa, based on the stated values.

The meter ensures:

  • Stable Uutrasonic technology on flow measuring
  • Exists in flowsized fra qp 0.6…15 m³/h
  • Watertemperatur of up to 130 °C
  • Both heating and cooling measurements
  • Possible to communicate via M-Bus, Wireless M-Bus, Modbus, BACnet, Analog in-/outlet, and more.
Data sheet

Description

Remote re-configuration and long-time accuracy

Imagine that utilities’ heat meters can be configured with new settings adjusted to the current needs – without logistical challenges and direct access to the meters and without legal registers, meter readings or network control being affected.

Imagine, that the meter’s log can be read in order for abnormal consumption patterns to be investigated – without having to disturb the customer unnecessarily.

With the new built-in 2-way communication in MULTICAL® 403 and a READy remote meter reading system, it is now possible to perform remote configuration of the ultrasonic heat meters and reading of the log without direct access to the installation. Discover the possibilities within flexible and easy remote configuration of heat meters – for less hassle for both the utility and the consumer.

Flexibility and longtime accuracy

Now, you only need to keep one type of heat meter in stock. With the Kamstrup MULTICAL® 403 everything from inlet/outlet position to energy unit, cut-off dates and much more can be configured individually via the meter’s front panel directly at the installation site.

This allows you to keep a low stock and save resources previously spent on planning.

Full flexibility
MULTICAL® 403 can be fitted with a selection of advanced communication modules. Kamstrup offers modules with Modbus, BACnet, M-bus, wireless M-bus and analogue outputs. By combining the meter’s very fast integration time and the modules’ optimised power consumption, you gain access to updated and very frequent meter data. By using M-Bus, the meter obtains a battery lifetime of up to 16 years with meter readings via the module every 10 seconds.

You can upgrade through separate software updates for the meter and module respectively as new possibilities and challenges occur without interfering with legal registers.